Back to INDUS-AD resources

Publisher reference, retrieved 21 November 2026. Dataset source revision: 4b414d527a2971ee9baebe2745447f95ac1fc535. Original source (dataset-file access may require approval). Download Markdown.

Owner-confirmed sensor mounting geometry

Owner-confirmed by Gagandeep Reehal on 22 October 2026. The machine-readable geometry accompanies this reference. These are physical mounting coordinates and source rotation parameters, separate from camera optical-frame projection matrices and recorded calibration payloads.

Mounting coordinate convention

Positions are in metres, relative to the normal front camera (cam_front). Y is forward and Z is up. Preserve the source X signs: named left cameras have positive X; named right cameras have negative X. The normal-front reference rotation is 0°. The rig IMU shares this origin; its rotation is unspecified.

Sensor Position [X, Y, Z] (m) Source rotation parameter
cam_front [0.000, 0.000, 0.000] Reference rotation 0°
cam_front_tilted [0.000, 0.000, -0.046] Rx(+5°)
cam_front_right [-0.651, -0.050, 0.000] Rz(+62.5°)
cam_front_left [0.651, -0.050, 0.000] Rz(-62.5°)
cam_rear [0.000, -2.133, 0.000] Rz(+180°)
cam_rear_left [0.651, -0.090, 0.000] Rz(-117.5°)
cam_rear_right [-0.651, -0.090, 0.000] Rz(+118.5°); later owner alternative Rz(+117.5°), both retained
Rig IMU [0, 0, 0] Unspecified
OS1-128 LiDAR [0, -0.545, +0.334] Pitch magnitude approximately 4°; sign unspecified

The rear-right Rz(+118.5°) comes from the camera source below. Rz(+117.5°) is a later owner-supplied alternative. Both are preserved with provenance; no single value is selected. Unspecified rotation components are not filled in.

Ground heights and LiDAR offsets

Camera-source provenance and rebasing

Camera source: minuszero/mz-VAD, branch petr_cam_transformations, commit 9043bf4811a314fc638faa661b286bed1bf2134a, projects/mmdet3d_plugin/VAD/mz_transformers/utils.py#get_camera_transformations (private upstream repository; use the published geometry tables and JSON reference on this page).

Source positions were converted from millimetres to metres, then rebased by subtracting [0, 0, 1.546] m:

position_m = source_position_mm * 0.001 - [0, 0, 1.546]

The normal-front reference, co-origin rig IMU, and explicit LiDAR X=0 are owner-provided. LiDAR mounting offsets, heights, approximate pitch magnitude, and the later rear-right alternative are also owner-supplied. Rotations are retained as source Rx/Rz parameters, in degrees. No optical-frame matrices are generated: axis mapping and transform direction must first be established. These mounting values do not overwrite or reinterpret the recorded calibration tables (Hugging Face access required).

Embedded LiDAR internal transforms

These are internal transforms, not vehicle mounting transforms. All translations in this section are MILLIMETRES, unlike the metre-valued mounting coordinates above. Directions are retained as supplied.

Direction R Translation (mm)
Beam → LiDAR identity [16.721, 0, 0]
LiDAR → sensor diag(-1, -1, 1) [0, 0, 38.195]
Internal IMU → sensor identity [-2.441, -9.725, 7.533]

The LiDAR internal IMU is distinct from the rig IMU at the front-camera origin. Do not substitute internal transforms for mounting transforms. Documenting the OS1-128 mounting geometry does not imply that LiDAR payloads are included in this camera/GNSS release.

The sensor and timing conventions describe the recorded tables and timing. This owner-confirmed mounting reference supplies the heights and mounting offsets separately from those existing conventions.